Services

Monitoring of works and coordinating all project participants.

The service of monitoring works and coordinating all project participants is crucial for ensuring the successful completion of a project within the set deadlines and budget, while maintaining high standards of quality and safety. This service encompasses several essential aspects.

PLANNING AND ORGANIZATION

Creation of detailed work plans: Based on technical specifications and project requirements, detailed work plans are developed that cover all phases of the project, from preparation and initial works to completion and delivery.
Defining key milestones: Key milestones are identified, including important project checkpoints, deadlines for the delivery of materials and resources, and stages for inspections and quality control.

PROGRESS MONITORING

Continuous work monitoring: Regular monitoring of on-site progress to ensure adherence to the established plans and standards. This includes inspections, supervision, and documenting all activities.
Reporting: Regular progress reports are created and delivered to all relevant project participants, including investors, designers, and contractors.

COORDINATION OF PARTICIPANTS

Communication: Maintaining constant and open communication between all project participants, including investors, designers, contractors, subcontractors, and other relevant parties.
Problem-solving: Quick and efficient resolution of any issues that may arise during the project to avoid delays and ensure smooth work progress.
Resource coordination: Managing and coordinating all necessary resources, including workforce, materials, and equipment, to ensure timely and optimal use.

QUALITY AND SAFETY CONTROL

Inspection and supervision: Regular inspections and supervision to ensure compliance with technical specifications, quality standards, and safety regulations.
Quality control: Implementation of quality control measures during all phases of the project, including testing and verification of materials and performed work.
Safety protocols: Ensuring adherence to all safety protocols and occupational health measures to safeguard all project participants and minimize the risk of accidents.

OPTIMIZATION AND EFFICIENCY

Identifying and applying improvements: Continuously identifying opportunities to improve processes and work efficiency, and implementing best practices to achieve maximum productivity and quality.
Risk management: Proactive risk management through identifying potential issues and developing strategies to mitigate or eliminate them.

Supervision of pipe assembly works, welding operations, and heat treatment.

Supervision of pipe assembly works, welding operations, and heat treatment

The supervision service for pipeline installation, welding, and heat treatment includes expert supervision and control of all phases of pipeline installation and welding, as well as the application of heat treatment, to ensure quality, safety, and compliance with technical and legal requirements. This service encompasses the following activities:

Supervision of Pipeline Installation:

Preparation and review of technical documentation.
Inspection of the correctness of materials and components.
Monitoring and inspecting the installation process, including checking dimensions, positioning, and joint quality.
Ensuring that the installation is carried out in accordance with the project, technical standards, and safety regulations.

Supervision of Welding Operations:

Review and approval of welding procedures.
Verification of welder qualifications and their competence for specific tasks.
Visual inspection of welded joints and non-destructive material testing, such as ultrasonic testing, radiography, penetrant testing, etc.
Ensuring proper application of welding procedures, including temperature control and the use of appropriate equipment.

Supervision of Heat Treatment:

Monitoring the application of heat treatment, performed to improve the properties of welded joints and materials.
Control and verification of heat treatment parameters, such as temperature, duration, and cooling.
Ensuring that the heat treatment is performed in accordance with prescribed procedures and standards.

All of these activities are carried out with the goal of achieving high-quality work, minimizing the risk of errors and non-compliance, and ensuring the durability and reliability of the pipeline system. The supervision service also includes the preparation of reports and documentation on the work performed and controls conducted, which serve as proof of quality and compliance with technical specifications and legal requirements.

Creation of working maps.

Creation of working folders

Service for the creation of working folders for projects involving 3D model processing, P&I (Piping and Instrumentation) processing, polishing of isometrics, creation of cutting lists, welding books, and material lists for assembly includes comprehensive documentation and preparation of technical data necessary for the successful realization of the project. This service includes the following steps:

3D Model Processing:

Preparation and revision of 3D models of pipelines, equipment, and systems using CAD software.
Detailed analysis and optimization of the model to ensure that all elements are correctly positioned and aligned with the project.
Generation of 3D views and animations for better visualization of the project.

P&I Diagram Processing (Piping and Instrumentation Diagram):

Creation and revision of P&I diagrams that display all pipelines, valves, instruments, and other equipment in the system.
Ensuring that all diagrams are accurate and aligned with the technical specifications of the project.
Documenting all changes and updates to the diagrams during the project.

Isometric Polishing:

Creation and optimization of isometric pipeline drawings that show the exact layout and dimensions of all elements.
Verification and alignment of isometrics with 3D models and P&I diagrams.
Detailed labeling of all components, joints, and welding works on the isometric drawings.

Cutting List Creation:

Preparation of a detailed cutting list containing all necessary information about the lengths and types of pipes and profiles to be cut.
Optimization of the cutting list to reduce material waste and increase cutting efficiency.
Documenting specifications for each material segment.

Welding Book Creation:

Documenting all welding procedures, including WPSs (Welding Procedure Specifications) and WPQs (Welder Performance Qualifications).
Preparing records of all welded joints, including location, type of weld, welder, and welding dates.
Keeping records of the results of NDT testing of welded joints.

Creation of Material Lists for Assembly (Bill of Materials – BOM):

Preparation of a detailed list of materials required for assembly, including pipes, fittings, valves, flanges, couplings, and other equipment.
Classification and labeling of all materials according to specific codes and standards.
Ensuring that the material list contains all necessary information for procurement and logistics.

The working folder creation service ensures that all technical data and documentation required for the project’s realization are accurate, up-to-date, and readily available to all project participants. This increases efficiency, reduces the risk of errors, and ensures high-quality work execution.

Preparation of final project documentation.

Preparation of final project documentation

The final project documentation preparation service provides expert support and consultation in the final phase of the project to ensure the completeness, accuracy, and compliance of the documentation with technical, legal, and contractual requirements. This service includes the following activities:

Review and Analysis of Existing Data:

Reviewing all collected data and documents during the project’s execution.
Analyzing inspection, testing, and monitoring results to ensure their accuracy and completeness.

Preparation of Technical Documentation:

Creating and/or reviewing technical drawings, specifications, and plans that reflect the actual state of the work performed.
Documenting all changes and adjustments made during the project’s execution.

Report and Certificate Preparation:

Preparing detailed reports on the work performed, including inspections, tests, and supervision.
Issuing necessary certificates of compliance with technical and legal regulations, as well as the quality of the work performed.

Coordination with Relevant Stakeholders:

Collaborating with designers, contractors, supervisory bodies, and investors to gather all necessary information and documents.
Ensuring that all stakeholders are informed about the final project status and that the documentation aligns with their requirements.

Quality and Compliance Control:

Verifying that all elements of the final project documentation correspond to the actual field conditions and comply with technical specifications.
Ensuring that all aspects of the documentation are in accordance with legal frameworks and contractual obligations.

Delivery and Archiving of Documentation:

Preparing the final documentation for delivery to the investor and relevant authorities.
Archiving all documents in compliance with internal and legal requirements for project document retention.

This service is essential for the formal closure of the project, enabling the investor and other relevant parties to have complete and accurate records of the work performed, which is critical for future maintenance, management, and any potential project reviews.

Technical consulting in welding.

Technical consulting in welding

The technical consulting service in welding provides expert guidance, analysis, and recommendations to ensure high quality and efficiency in welding processes. This service encompasses a range of activities that are essential for proper planning, execution, and control of welding work. The activities include:

Development and Revision of Welding Procedures (WPS – Welding Procedure Specification):

Development of detailed procedures that define all welding parameters, including the selection of materials, welding methods, joint types, and parameters such as current, voltage, and welding speed.
Reviewing and approving existing WPS to ensure their compliance with relevant standards and project specifications.

Welder and Welding Procedure Qualification (WPQ – Welder Performance Qualification):

Organization and execution of qualification tests for welders to ensure they possess the necessary skills and competencies for specific welding tasks.
Verification of welding procedures through practical tests and inspections.

Consultation on Material and Equipment Selection:

Recommendations for selecting appropriate welding materials, including base materials and consumables (electrodes, wires, gases).
Advising on the selection and proper use of welding equipment and tools.

Quality Control and Inspection of Welded Joints:

Conducting visual and non-destructive testing (NDT) methods such as ultrasonic testing, radiography, penetrant testing, and magnetic particle inspection.
Evaluating inspection and test results and providing recommendations for corrective actions if necessary.

Consulting on Post-Weld Heat Treatment:

Recommendations for applying heat treatment to reduce residual stresses and improve the properties of welded joints.
Development and supervision of procedures for post-weld heat treatment.

Problem-Solving and Process Optimization:

Analysis of issues encountered during welding operations and providing recommendations for their resolution.
Optimization of welding processes to increase efficiency, reduce costs, and improve quality.

This technical consulting service ensures that welding work is carried out to the highest standards of quality, safety, and efficiency, minimizing the risk of errors and non-compliance, and ensuring the longevity and reliability of welded structures.

Preparation of welding work documentation.

Preparation of welding work documentation

The welding work documentation preparation service encompasses comprehensive documentation of all aspects of the welding process to ensure compliance with technical standards, legal regulations, and specific project requirements. This service includes the following activities:

Welding Procedure Specification (WPS):

Development and documentation of detailed welding procedures that define welding parameters, materials, methods, and working conditions.
Verification and approval of WPS by qualified experts and, if necessary, relevant authorities.

Welder Performance Qualification (WPQ):

Documenting the results of qualification tests for welders, including test joints, testing methods, and results.
Creating and maintaining records of welder certifications, including expiration dates and specific qualifications.

Inspection Test Plan (ITP) Creation:

Development of inspection plans that define all inspection and testing steps during welding operations.
Documenting testing methods, inspection frequency, and acceptance criteria.

Quality Control Documentation:

Preparing reports on the results of visual and non-destructive testing (NDT), such as ultrasonic testing, radiography, penetrant testing, and magnetic particle inspection.
Maintaining records of all inspections carried out and their results.

Heat Treatment Reports:

Documenting the procedures and results of post-welding heat treatment, including parameters such as temperature, duration, and cooling.
Preparing reports confirming compliance with prescribed procedures and standards.

Material Reports:

Keeping records of materials used, including base materials and consumables (electrodes, wires, gases).
Documenting material test reports (MTR) to confirm compliance with specifications.

Corrective Actions and Non-Conformance Documentation:

Preparing reports on any non-conformances observed during welding operations.
Documenting corrective actions taken to ensure compliance with standards and specifications.

Training and Education:

Preparing and documenting educational materials and training programs for welders and technical personnel.
Maintaining records of completed training and staff qualifications.

Final Project Documentation:

Compiling all welding work documentation, including WPS, WPQ, ITP, testing reports, material certificates, and heat treatment reports.
Preparing final project documentation for submission to the investor and relevant authorities.

This service ensures that all aspects of welding work are thoroughly documented and in compliance with technical and legal requirements, allowing for quality control, identification of potential issues, and facilitating future inspections and maintenance.

Welder certification.

Welder certification

The welder certification service encompasses a comprehensive process of qualifying and verifying welders to ensure they possess the necessary skills and knowledge to perform specific welding tasks according to the highest standards of quality and safety. This service includes the following steps:

Qualification and Documentation Review:

Review of previous certifications, work experience, and relevant documents of the welder.
Verification of the authenticity of the submitted documents.

Preparation and Development of Welding Tests (WPQ – Welder Performance Qualification):

Creation of specific welding tests that meet project requirements and standards.
Defining test samples, welding methods, and parameters that will be evaluated.

Conducting Practical Welding Tests:

Organization and supervision of practical welder tests.
Ensuring appropriate conditions for the tests, including necessary equipment and materials.

Inspection and Evaluation of Welded Joints:

Visual inspection of welded samples.
Conducting non-destructive testing (NDT) such as ultrasonic testing, radiography, penetrant testing, and magnetic testing to evaluate the quality of the welds.
Documenting test results.

Certificate Issuance:

Preparing certificates for welders who have successfully passed the welding tests.
Certificates include all relevant information, such as material type, welding method, welding position, and testing parameters.

Record Keeping and Certificate Maintenance:

Keeping records of all issued certificates, including issue date, expiration date, and specific qualifications.
Regular monitoring of certificate expiration and organizing periodic re-qualification tests to ensure ongoing compliance with technical requirements.

Education and Training:

Organizing educational programs and training for welders to ensure continuous learning and skill improvement.
Providing information on the latest techniques, standards, and safety practices in welding.

Compliance Consulting:

Advising welders and technical staff on compliance with relevant national and international standards (e.g., EN, ASME, AWS).
Providing guidelines for the preparation and execution of welding tasks in line with best practices.

Reporting:

Preparing detailed reports on the certification process, including test results, evaluations, and issued certificates.
Delivering reports to relevant stakeholders, including regulatory bodies, investors, and contractors.

This welder certification service ensures that all welders are adequately qualified to perform specific tasks, guaranteeing the quality and safety of welding work and compliance with technical and legal requirements.

Employment mediation.

Employment mediation

The employment mediation service encompasses a range of activities aimed at connecting employers and potential employees, ensuring optimal job placement by considering the needs and requirements of both parties. This service includes the following steps:

Employer Needs Analysis:

A detailed understanding of the positions that need to be filled, including job descriptions, required qualifications, skills, and experience.
Advising employers on the labor market and candidate availability.

Creation and Publication of Job Advertisements:

Creating attractive and detailed job advertisements according to the employer’s needs.
Publishing job ads on relevant platforms, including online job portals, social media, and other media.

Candidate Search and Selection:

Collecting and reviewing candidate applications.
Conducting preliminary interviews and assessments of candidates to determine their alignment with the required qualifications and skills.
Using databases and contact networks to find potential candidates who are not actively seeking employment.

Interviews and Evaluation:

Organizing and conducting interviews with selected candidates.
Utilizing various assessment methods, including psychometric tests, skills tests, and work ability evaluations.

Presentation of Candidates to the Employer:

Preparing and delivering detailed candidate profiles to the employer, including resumes, assessment results, and recommendations.
Coordinating interviews between the employer and candidates.

Support in Negotiation and Employment:

Assisting in negotiations regarding employment conditions, including salary, benefits, and working conditions.
Advising both the employer and the candidate to achieve a mutually satisfactory agreement.

Contract Preparation and Administration:

Assisting in the preparation of employment contracts and ensuring compliance with legal requirements.
Providing administrative support throughout the hiring process.

Monitoring and Evaluation:

Monitoring employer and employee satisfaction after hiring.
Offering support in case of problems or disagreements and assisting in their resolution.

Education and Counseling:

Organizing training and educational sessions for employers and employees, such as career development workshops, human resource management training, and similar.
Advising employers on best practices for employee retention and improving the work environment.

The employment mediation service enables employers to find and hire suitable candidates quickly and efficiently, while helping candidates find jobs that best match their qualifications and career goals. This reduces hiring costs and time while increasing satisfaction for both parties in the employment process.